Disconnect and reconnect parameters - by: veda

Our OPC client is used for "realtime" evaluation of data in a closed high speed network. If we have an issue with OPC server connections we need to know this within a few seconds to be sure that the users do not take decissions based on old data. It is ok with some time before the client reconnects to the server after a disconnect, but we need a short time before the disconnect is detected (typically 2 seconds). When we e.g physically disconnect the network cable it takes about 20 seconds before we get a disconnect event from the EasyUAClient.

Can you guide us to the relevant parameters that controls the reconnect/disconnect timings and any potential considerations we need to know about?

Thanks